Seton Identification and Safety Products
Luminous Signs
Description
Standard Legend Colors
Thickness (ASTM-D1593)
Gloss
Adhesive Properties
Service Temperature
Abrasion Resistance
Avg. Outdoor Durability
Chemical Resistance
7 Day Immersion
Dip Test
Rub Test
Shelf Life
Luminous Signs(view printable PDF of this page here)
Description: Seton luminous danger signs can be seen in complete darkness up to 8 hours. Seton luminous danger signs are constructed of a special flexible self-adhesive vinyl, and are suited for indoor use only.
Standard
Legend Colors:
Black and Red
Thickness:
(ASTM-D1593)
Total 0.019 in. (0.48mm)
Gloss: 35 Gardner Units
Adhesive Properties: Adhesion to Steel (PSTC-1) 15 min. dwell (avg) - 5 oz/in. (5.5N/100 mm) Ultimate (72 hr dwell) (avg) 6 oz/in (6.6 N/100 mm)Tack (ASTM-2979) (avg) 470g (5 N)
Luminous Signs
Service
Temperature:
-40F to 158F (-40C to 70C)
Abrasion
Resistance:
(Method 5306 of U.S. Federal Test Method Std. No 191A):
CS-17 Wheel 1000 g wt legend withstands up to 500 cycles
Average Outdoor Durability: Not recommended
Top
Chemical Resistance:
 Reagent 7 Day Immersion Dip Test Rub Test
 30% Sulfuric Acid NE NE NE
 10% Sulfuric Acid NE NE NE
 30% HCL NE NE NE
 10% HCL NE NE NE
 50% NaOH NE NE NE
 10% NaOH NE NE NE
 Methyl Ethyl Ketone F F NE
 Acetone F F NE
 Methanol F F NE
 1, 1, 1, Trichloroethane F F NE
 ASTM #3 Oil NE NE NE
 SAE 20 Oil NE NE NE
 Mineral Spirits F NE NE
 Con Acetic F F NE
 5% Acetic NE NE NE
 Diesel Fuel F NE NE
 Con Ammonia NE NE NE
 10% Ammonia NE NE NE
 Turpentine F NE NE
 Kerosene F NE NE
 Water NE NE NE
       
 NE: No Effect     F: Failed
Top
7 Day Immersion: Immersed in reagent for 7 days.
Top
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.
Top
Rub Test: Rubbed sample for one minute with swab soaked in reagent.
Top
Shelf Life: Indefinite when stored at 70°F (21°C) and 40% to 50% R.H.
Top
 
Don’t see what you need? Need more info?
Our customer service reps are standing by to assist you. Call 800-571-2596.