Seton Identification and Safety Products
Plastic Valve Tags
Use
Material Construction
Standard Material Colors
Thickness
(ASTM D 1593)
Abrasion Resistance
(Method 5306 of U.S. Federal Test Method Std. No. 191A)
Service Temperature
Average Outdoor Durability
Chemical Resistance
7 Day Immersion
Dip Test
Rub Test
Shelf Life
Plastic Valve Tags(view printable PDF of this page here)
Use: Plastic Valve tags are designed for valve and pipe identification.
Material Construction: ABS Plastic
Standard
Material Colors:
Black, Blue, Green, Red and White
Thickness
(ASTM D 1593):
Total: 0.097 in. (2.5mm)
Abrasion
Resistance:
CS-10 wheels, 250 g wts.
Plastic Valve Tags
(Method 5306 of U.S. Federal Test Method Std. No. 191A): The legend withstands up to 1500 cycles
Service
Temperature:
-40°F to 230°F (-40°C to 110°C).
Average Outdoor Durability: Not recommended for outdoor use.
Top
Chemical Resistance:
 Reagent 7 Day Immersion Dip Test Rub Test
 30% Sulfuric Acid NE NE NE
 10% Sulfuric Acid NE NE NE
 30% HCL NE NE NE
 10% HCL NE NE NE
 50% NaOH NE NE NE
 10% NaOH NE NE NE
 Gasoline NE NE NE
 Turpentine NE NE NE
 Glacial Acetic Acid F NE NE
 5% Acetic Acid NE NE NE
 10% Ammonia NE NE NE
 5% Sodium Hypochlorite NE NE NE
 10% Sodium Chloride NE NE NE
 Methyl Ethyl Ketone F F F
 Acetone F F F
 Methanol NE NE NE
 1, 1, 1, Trichloroethane F F F
 IPA (Isopropanol) NE NE NE
 ASTM #3 Oil NE NE NE
 SAE 20 Oil NE NE NE
 Mineral Spirits NE NE NE
 Diesel Fuel NE NE NE
 Heptane NE NE NE
 Toluene F F F
 Alconox NE NE NE
 Kerosene NE NE NE
 Water NE NE NE
       
 NE: No Effect     F: Failed
Top
7 Day Immersion: Immersed in reagent for 7 days.
Top
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.
Top
Rub Test: Rubbed sample for one minute with swab soaked in reagent.
Top
Shelf Life: 3 - 5 years
Top
 
Don’t see what you need? Need more info?
Our customer service reps are standing by to assist you. Call 800-571-2596.